Quenching furnace is a non-standard electric furnace specially designed according to the requirements of users. It is mainly used for quenching, heating and other heat treatment of various workpieces in aluminum industry.

Conditions of use

1. Indoor use.

2. The ambient temperature is in the range of – 5 ℃ - 40 ℃.

3. The monthly average maximum relative humidity is not more than 85% and the monthly average temperature is not more than 30 ℃.

4. There is no conductive dust, explosive gas and corrosive gas that can seriously damage metal and insulation.

5. No obvious vibration and turbulence.

The furnace consists of furnace body, furnace door, heating element, ventilation mechanism and control system.

The furnace body is welded by section steel and steel plate, the inner wall of the furnace lining is connected with the furnace shell by stainless steel plate, and the interlayer of the furnace body and furnace liner is filled with aluminum silicate refractory fiber for heat insulation.

The furnace door is designed at the lower part of the furnace body, that is to say, the work pieces enter or exit from the bottom. The lower opening of the furnace body is opened, and the opening and closing action of the furnace door is mechanical transmission, which is completed by motor, reducer, sprocket, chain, track, etc.